SmartDist

Universal Distillation System Designed for Chemists by Chemists

The EasyDist has been engineered for simplified operation and accurate, repeatable performance. Performs scaled down versions of all USEPA approved distillations.

• 20-position reduced volume distillation system
• Largest batch processing system available
• Reduce turn around time
• Minimize hazardous waste and disposal costs
• Distillation procedures include:

Components

Heating Unit

• Continuous heating element
• Increase laboratory efficiency
• Improved temperature uniformity
• Improved temperature stability
• Improved heat transfer

Smart Controller EasyDist Controller

• Large, easy to read LED display
• Simple keypad entries to set programming parameters
• 8 stages of temperature control
• 8 stages of dwell times
• Programmable rise rates for each temperature stage
• Flash memory - no battery required
• Digital PID (Proportional, integral, derivative) temperature control
• Delayed start
• End of run alarm
• Programmable high temperature cut-off
• Type J thermocouple
• Built in diagnostics

Additional Safety Features

• Open thermocouple detection
• Over temperature detection by microprocessor
• Redundant circuitry for over temperature protection

Gas/Vacuum Distribution Manifold

• 20 Ports
• 20 Individual flow adjusting valves
• Required for cyanide, fluoride, sulfide-total, and sulfide-acid-soluble

Top View of the SmartDist

Patented Glassware

Patented Glassware Package Simplifies the Most Complex Distillation

Specifications

Physical

• Heating Unit: 75 lbs.
• Smart Controller 9 lbs.

Dimensions

• Heating Unit: 11"H x 26"W x 20"D
• Smart Controller 6 ¾"H x 6"W x 10"D

Temperature

• Control Range and Resolution: 50°C to 250°C in 1° increments
• Accuracy: +/- 2°C in control range
• Amplitude at Set Point: Less than +/- 1°
• Repeatability: +/- 1°
• Stability: +/- 1°
• Ramp Rate: 4°C/minute

Electrical

• Operating Voltage: 208-240 VAC, 50-60 Hz
• Current: 12 Amps @220V
• Fusing for Heating Unit: Two 15 Amp fuses @250V
• Fusing for Smart Controller: Two 1 Amp fuses for control circuits